MS300 Strapping head MS300
The patented strapping head MS300, has been assembled with high quality materials to guarantee low wearing of the spare parts.
The strapping head MV300 was patented by Messersì to provide maximum reliability and functionality ensuring limited wear of spare parts.
MV300
Description
The welding by vibration is carried out for the fusion of the two surfaces in contact. The welding method is a clutch for which there is no heat input from outside but this comes from the dissipation of the energy produced by friction. The increase of local temperature required for the process is obtained by friction that melts the two pieces to be welded. In the cooling step the two pieces remain welded under pressure. On the piece subjected to movement, a pushing pressure is applied so as to maintain in contact the parts to be joined during the welding process.
| Technical data | |
| Sealing of the strap | Friction system |
| Installed electrical power | 0,75 kW |
| Suitable strapping band | width 8 ÷ 19 mm thickness 0,5 ÷ 1 mm |
| Cycle time: | from 1,2 to 3 sec (according to tensioning) |
| Tensioning: | Up to 300 kg |
| Supplied voltage | 400 V three-phase 50Hz |
| Feeding and recovery speed | 2,5 ÷ 5,5 m/sec |
| Tensioning speed | From 0,10 m/sec to 0,25 m/sec |
